Skip to content

In-depth review

iOttie Easy One Touch 6 Dash and Windshield Mount Review (2027)

The iOttie Easy One Touch 6 dash and windshield mount brings the phone closer on deep dashboards with a telescopic arm. Our research-based verdict.

TGBy TrueGear Research TeamIndependent editorial teamLast updated How we researchResearch-based assessment · Car Phone Mounts
Specs verified against manufacturer docs
No paid placements
Independently funded by readers
Updated 2026-10-29
iOttie Easy One Touch 6 Dash and Windshield Mount Review (2027) featured graphic
iOttie Easy One Touch 6 Dash Mount (EOTNCG102)

iOttie Easy One Touch 6 Dash Mount (EOTNCG102)

A one-touch cradle on a telescopic arm for deep dashboards and windshields that sit far from the driver.

Check priceAdd to cart

Our verdict

The Easy One Touch 6 dash and windshield mount solves a specific and common problem: dashboards so deep that a short mount leaves the phone too far away to read comfortably. Its telescopic arm from 5 to 6.75 inches, 260 degree pivot and one-touch cradle put nearly any phone at a readable distance, with a cord organizer keeping the cable tidy. The costs are a one-time-use dashboard pad and suction that dislikes textured or curved surfaces and extreme heat, so the right buyer is a driver with a smooth dash or windshield spot and one main car.

What we like

  • Telescopic arm extends from 5 to 6.75 inches, bringing the phone closer on deep dashboards
  • One-touch arms lock and release the phone with a single hand
  • Cradle fits a wide range of phone sizes and cases without extra adapters
  • 260 degree pivot plus an adjustable bottom foot and a built-in cord organizer

What to watch out for

  • The dashboard pad is one-time use, so moving to another car means the pad cannot be reused as-is
  • Suction can lose grip on textured or curved dashboards and in extreme heat
  • The arm can wobble slightly on rough roads when fully extended with a large phone

What owners report: iOttie Easy One Touch 6 Dash Mount (EOTNCG102)

Synthesized from recurring themes in long-term owner feedback.

Most praised

  • Owners like the one-touch arms locking and releasing the phone with a single hand, handy when getting in and out often.
  • Owners like the telescopic arm bringing the phone closer on deep dashboards where a short mount would sit too far away.
  • Owners like the cradle fitting a wide range of phone sizes and cases without extra adapters.

Common complaints

  • Owners note the dashboard pad is one-time use, so moving the mount to another car means the pad cannot be reused as-is.
  • Owners note suction can lose grip on textured or curved dashboards and in extreme heat.
  • Owners note the arm can wobble slightly on rough roads when fully extended with a large phone.

Who it is for

Drivers with deep dashboards or a smooth windshield spot who want a cradle at eye level for any phone and case.

The telescopic arm is the whole argument

Most dash mounts are short and fixed, which works on shallow dashboards and fails on deep ones. Extending to 6.75 inches brings the phone from the base of a deep windshield or the back of a broad dash into comfortable reading range, and the adjustable bottom foot keeps large phones seated as the arm extends. Owners with deep dashboards cite exactly this: a short mount would have sat too far away, and this one does not.

One-touch cradle convenience

The one-touch arms lock and release with a single hand, which suits drivers who get in and out often, and the cradle fits a wide range of phone sizes and cases without adapters. That universality is the cradle's edge over magnetic mounts: no rings, no MagSafe requirement, no case compatibility question, just a phone pressed into arms that close around it.

Suction and the one-time pad

Suction is the compromise. It can lose grip on textured or curved dashboards and in extreme heat, and the dashboard pad cannot be reused as-is if the mount moves to another car. Fully extended with a large phone, the arm can also wobble slightly on rough roads. None of this disqualifies the mount on a smooth surface in one car, but it does disqualify it as a multi-car traveller.

Key specifications

Model
EOTNCG102
Arm
Telescopic, 5 to 6.75 inches
Mount type
One-touch cradle, suction cup plus dashboard pad
Pivot
260 degree pivot
Extras
Adjustable bottom foot, built-in cord organizer
Limits
Dashboard pad one-time use; not for leather dashboards; no charging stated

Also consider

Research-based assessment. TrueGear has not hands-on tested this product; this evaluation synthesizes manufacturer specifications, retailer documentation, and published expert reviews.

Questions, answered

Can I move this mount to another car?

The suction cup itself can move, but the dashboard pad is one-time use and cannot be reused as-is in the second car. On a windshield it moves more freely, provided both windshields are clean and smooth. For frequent car changes, a vent clip or a multi-surface mount without a pad is the better choice.

Does it work on a textured dashboard?

Poorly, by owner report: suction loses grip on textured or curved dashboards. A smooth dash or a clean windshield is the right surface. If your dash is textured, a vent, CD slot or cup holder mount avoids the suction question entirely.

Does the arm wobble while driving?

Owners report slight wobble on rough roads when the arm is fully extended with a large phone. Shortening the arm where the dash allows, and keeping the phone as close to the base as readable, reduces it. On smooth roads it is not a reported problem.

Every guide on Car Phone Mounts15 pages