Skip to content

In-depth review

Bromic Tungsten 6000W Electric Patio Heater Review (2027)

The Bromic Tungsten 6000W is the fixed electric answer for covered patios. Our research verdict.

TGBy TrueGear Research TeamIndependent editorial teamLast updated How we researchResearch-based assessment · Patio Heaters
Specs verified against manufacturer docs
No paid placements
Independently funded by readers
Updated 2026-11-04
Bromic Tungsten 6000W Electric Patio Heater Review (2027) featured graphic
Bromic Tungsten 6000W Electric Patio Heater

Bromic Tungsten 6000W Electric Patio Heater

The fixed electric answer: 6000W of directional infrared for a covered patio that will never suit a gas tank.

Our verdict

The Bromic Tungsten 6000W is the heater for patios where gas has already lost the argument: covered, windy, tank-hostile or flame-restricted spaces where a tall propane column cannot go. Its infrared heat arrives instantly, aims where the brackets point it, and ignores wind that would shred a propane circle. The price of those virtues is installation: a 230 to 240V circuit, a suitable wall or ceiling, horizontal mounting and a control arrangement that is not in the box. Buyers who accept that work get the most civilised heat in this guide. Buyers who want a heater this weekend should buy a propane mushroom instead.

What we like

  • 6000W dual-element infrared warms people directly, so wind steals far less of the heat than with a gas heater
  • Wall and ceiling brackets with adjustable angle aim the heat at the seating, not at the sky
  • Maker-stated heating area of up to 144 sq ft in a protected setting at an 8 ft mounting height
  • Slim 56 in bar profile sits under a ceiling without becoming the visual focus of the patio

What to watch out for

  • Fixed installation means an electrician and a suitable circuit, not a weekend unboxing
  • Each element needs its own control arrangement, with switches or dimmers not included
  • It must be mounted horizontally with the face angled down outdoors, which rules out some pergola beams

What owners report: Bromic Tungsten 6000W Electric Patio Heater

Synthesized from recurring themes in long-term owner feedback.

Most praised

  • Owners say the heat arrives instantly, with no warm-up wait while guests settle into chairs
  • The directional aim gets credit from terrace owners who previously heated empty air above the tables
  • Buyers like the slim bar for disappearing under a ceiling once the novelty wears off

Common complaints

  • Some owners were surprised by the electrical work and cost beyond the heater itself
  • A few report the coverage shrinking sharply in open, windy spots compared with the protected-setting figure
  • Owners note the control setup needs planning, since no switch or dimmer is in the box

Who it is for

Covered patio and terrace owners with a 230 to 240V supply, who want permanent, wind-proof, directional heat.

Infrared changes the wind equation

Gas heaters warm air, and wind carries warmed air away, which is why a propane circle collapses on a gusty night. Infrared warms people and surfaces directly, so wind matters far less: the heat travels in a beam from the bar to the guest, not through the air between them. That is why terrace owners with open sides choose Bromic bars despite the installation cost. The trade is directionality: step out of the beam and the warmth stops, while a gas heater at least pretends to warm a circle.

Installation is the real purchase

The bar itself is simple: a slim 56 in unit with brackets. The installation is not: a 25A circuit at 230 to 240V, a mounting height of 8 ft for ceiling mounting per the maker, horizontal orientation only, and a switch or dimmer arrangement for each element. None of this is difficult for an electrician, but all of it costs money and planning beyond the heater tier. Buyers who budget only for the bar are the ones who report surprise, so the honest total includes the electrical work from the start.

The coverage figure needs its footnote

The maker states up to 144 sq ft, but that figure assumes a protected setting at an 8 ft mounting height, and open or windy spots deliver less. It is also a beam footprint, not a circle: the bar warms a rectangle in front of it, and guests outside that rectangle get little. Plan the seating inside the beam, mount at the right height, and the figure holds. Mount too high, too low or facing the wrong way, and no wattage rescues the layout.

Key specifications

Power
6000W, dual element
Supply
230 to 240V, 25A, per maker manual
Heating area
Up to 144 sq ft in a protected setting, per maker
Dimensions
56 x 8.5 x 3.5 in
Mounting
Wall or ceiling brackets, adjustable angle, horizontal only
Model
BH0420033, black finish

Also consider

DR. INFRARED HEATER DR-338 Tripod Heater

DR. INFRARED HEATER DR-338 Tripod Heater

The movable electric: a 1500W carbon infrared head on a tripod, with a remote and a timer.

Why consider it: The movable electric on ordinary 120V, for renters who cannot install a fixed bar

  • Power: 900W / 1200W / 1500W, carbon infrared
  • Supply: 120V, per maker manual
EAST OAK 48,000 BTU Patio Heater Bronze

EAST OAK 48,000 BTU Patio Heater Bronze

The balanced mushroom: 48,000 BTU, a round table on the post and a double-layer stainless burner.

Why consider it: The propane mushroom, for patios where a fixed electric installation is not wanted

  • Heat output: 48,000 BTU (maker rating)
  • Coverage: Up to 18 ft diameter, per maker

Research-based assessment. TrueGear has not hands-on tested this product; this evaluation synthesizes manufacturer specifications, retailer documentation, and published expert reviews.

Questions, answered

Can I plug the Bromic Tungsten 6000W into a normal outlet?

No. It requires 230 to 240V at 25A per the maker manual, which is a dedicated circuit installed by an electrician, not a standard 120V household outlet. Plugging it into the wrong supply risks damage and voids the installation requirements. If only 120V is available, the DR-338 tripod heater in this guide is the electric alternative that runs on an ordinary outlet.

Can the Bromic be mounted vertically?

No. The maker forbids vertical mounting, because the elements can sag and burn out prematurely when vertical, and vertical installation voids the warranty. Mount it horizontally, with the face angled down for outdoor use, and under cover where possible for the longest life and best appearance.

Does it need a dimmer or controller?

Each element can be wired to a simple on and off switch, a dimmer or a smart control system, none of which is included. A plain switch gives full heat or nothing, while a dimmer or controller lets the output be trimmed for mild evenings. Plan the control with the electrician at installation time, since retrofitting it later costs more.

Every guide on Patio Heaters16 pages